51学通信技术论坛

标题: Lab4 OSPF区域间路由汇总配置 [打印本页]

作者: 爱卫生 时间: 2012-2-7 16:35:06 标题: Lab4 OSPF区域间路由汇总配置

本练习的目标是：

1）了解OSPF的区域间路由汇总配置

2）使用show命令进行相关验证。

附件包含拓扑、步骤及指令、验证三部分。

本实验通过Juniper模拟器实现，所有接口名称均为em开头。如果是实际设备请将此接口名称进行替换。

部分内容摘要如下：

OSPF Area Route Summary Configuration Overview

OSPF route summarization aggregates routes sent by nonbackbone areas to the backbone routers so that the size of their link-state databases is reduced.

Part Three: Area Route Summary Configuration

To summarize the route, you need issue the area-range command in ABR. In this case, we need configure the R2 with route summary. (The configuration below are only shown the part related configuration, some configuration in part two is omitted.)

_________________________________________________
lab@R1# show logical-routers R2 protocols ospf
area 0.0.0.1 {
area-range 3.3.3.0/24;
}

_________________________________________________
[attach]1063[/attach]

欢迎光临 51学通信技术论坛 (http://51xuetongxin.com/bbs/)